Sony XAV-A1 - Manual (Page 9)

9
FRONT L/R
REAR L/R
SUB OUT (MONO)
REAR MONITOR OUT
AUX 2
AUX 3
To the +12 V power terminal which is
energized at all times
*1
*1 Be sure to connect the black ground lead to it first.
*2 First connect the black ground lead, then connect the yellow and red power input leads.
*3 When your car has built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power
supply leads” (page 7).
*4 This connection is only for amplifiers. Connecting any other system may damage the unit.
*5 It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-
operated telescopic antenna.
Note on the accessory power input lead (red)
If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times.
Yellow (0.35 m)
Red (0.25 m)
Orange/white (0.25 m)
Purple/White (5m)
Fuse (10 A)
Light green (2.5 m)
Parking brake switch lead of car
Tap 9
To the +12 V power terminal which is
energized in the accessory position of
the ignition key switch
*1*3
To a car’s illumination signal *1
To the + 12 V power terminal of the
back lamp lead of car
To a metal surface of the car *2
Blue/white (0.25 m)
Blue (0.25 m)
To AMP REMOTE IN of an optional
power amplifier
*4
To the power antenna control lead or
power supply lead of antenna booster
amplifier
*3*5
Front speakers
(optional)
Rear speakers
(optional)
White
White/black
Gray
Gray/black
Green
Green/black
Purple
Purple/black
RCA interconnects
(optional)
RCA interconnects
(optional)
RCA interconnects
(optional)
Left
Right
Left
Right
Black (0.35 m)
Max. supply current 0.3 A
Max. supply current 0.3 A
Amplifiers
(optional)
To XM tuner (optional)
Connection
box 1
Power
supply
leads 2
(for main
unit)
Active subwoofer
(optional)
Rear speakers
(optional)
Front speakers
(optional)
To game
etc.
To rear
monitor etc.
To the optional
back camera or a
video equipment
From car antenna
Connecting without optional TV tuner unit
RC-104 (optional)
digital output
Protection device