ADTRAN L128 - Manual (Page 162)

61202.070L1-1 Express L128/L128T User Manual 145
Appendix E
Terminal Mode Commands
The Express L128/L128T supports a command line interface. All menu op-
tions are configurable and readable from the terminal mode. Additional com-
mands are also available.
Menu Commands
Every menu item in the menu structure can be accessed through the terminal
mode interface. Terminal commands are as follows:
top_menu sub_menu1 sub_menu2 … config_item
Each config_item is entered as shown below.
TYPE: ENTERED AS:
string printable characters within double quotes
password printable characters within double quotes
IP address xx.xx.xx.xx (0..9) separated by ‘.’
Hex xx:xx:xx:xx (0..9,a..f) separated by ‘:’
enum sub-string or [#index]
unsigned digits (0..9)
date mm-dd-yyyy
time hh:mm:ss
date/time mm-dd-yyyy hh:mm:ss
activator read only
list followed by index with first record being 1
array followed by index with first record being 1