Using the mobile fm transmitter and charger – Aerielle Technologies i2i-RDS User Manual

Page 6

Advertising
background image

6

Using the mobile FM
transmitter and charger

To set up and use your mobile FM transmitter and

charger:

1 Insert the mobile FM transmitter firmly into your car’s

cigarette lighter or power socket.

2 Tune your car's FM stereo to an unused FM frequency.
3 Plug the connector on the end of the cable into your

iPod.

Note: To disconnect, unplug it from your iPod.

4 Start your iPod player. Your mobile FM transmitter

turns on when an audio signal is detected.

5 Select the frequency from Step two above using the

up and down arrows on the front of your mobile FM
transmitter.

Tip: The mobile FM transmitter works best

when the iPod volume is set between 50%
to 75% of maximum. After you have tuned
to the frequency and begun transmitting,
adjust the volume to a comfortable level.

Tip: Your iPod may not automatically turn

off. Be sure to unplug it to stop playback
and to deactivate charging before exiting
your car.

i2i-RDS_08-400_Final revised.fm Page 61 Jan. 28, 2008

Advertising