Getting assistance, Safety information, Warranty – Adder Technology X2 User Manual
Page 28
27
Safety information
• For use in dry, oil free indoor environments only.
• Do not use to link between buildings.
• Ensure that the twisted pair interconnect cable is installed in compliance
with all applicable wiring regulations.
• Do not connect the CATx link interface (RJ45 style connector) to any other
equipment, particularly network or telecommunications equipment.
• Warning – the power adapter contains live parts.
• No user serviceable parts are contained within the power adapter - do not
dismantle.
• Plug the power adapter into a socket outlet close to the module that it is
powering.
• Replace the power adapter with a manufacturer approved type only.
• Do not use the power adapter if the power adapter case becomes damaged,
cracked or broken or if you suspect that it is not operating properly.
• If you use a power extension cord with the extenders, make sure the total
ampere rating of the devices plugged into the extension cord do not exceed
the cord’s ampere rating. Also, make sure that the total ampere rating of all
the devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
• Do not attempt to service the modules yourself.
• The modules and power supplies can get warm in operation – do not situate
them in an enclosed space without any ventilation.
• The modules do not provide ground isolation and should not be used for
any applications that require ground isolation or galvanic isolation.
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of original
purchase. If the product should fail to operate correctly in normal use during the
warranty period, Adder will replace or repair it free of charge. No liability can be
accepted for damage due to misuse or circumstances outside Adder’s control.
Also Adder will not be responsible for any loss, damage or injury arising directly
or indirectly from the use of this product. Adder’s total liability under the terms
of this warranty shall in all circumstances be limited to the replacement value
of this product. If any difficulty is experienced in the installation or use of this
product that you are unable to resolve, please contact your supplier.
Getting assistance
If you are still experiencing problems after checking the list of solutions in the
Troubleshooting section then we provide a number of other solutions:
•
Adder Technology website
Check the Support section of our website for the latest solutions.
•
•
Fax
in the UK:
01954 780081
in the US:
+1 888 275 1117
•
Phone in the UK:
01954 780044
in the US:
+1 888 275 3337