Aga Ranges Fired Earth - Manual (Page 12)

Product Sealant Finish Cleaner Maintenance
Terracotta
(inc. Reclaimed terracotta)
Fired Earth Linseed Sealer*
Wax paste (high
protection/high
maintenance/
colour enhancer)
Cotto Rapid
(low maintenance,
less protective)* For waxed floors, use Fired Earth
Super Floor; for Cotto Rapid
floors, use Clean Stone 1* For waxed floors it is advisable to apply further
wax coats from time to time; For Cotto Rapid floors,
reapply when floor appears dull*
Pre-sealed terracotta Not required Cotto Rapid* Clean Stone 1* Reapply Cotto Rapid when floor appears dull*
Lubelska bricks Fired Earth Stone Shield* Cotto Rapid* Clean Stone 1* Reapply Cotto Rapid when floor appears dull*
Encaustic
(follow specific instructions)
Fired Earth Stone Shield* Fired Earth Stone Finish* Fired Earth Super Floor* Reapply Fired Earth Stone Finish when floor appears dull*
Geometrics MN Stain Stop* Not required MN Easy Care* Not required
Slate
Stone Shield
in dry areas* MN Stain Stop
in wet areas* Fired Earth Stone Finish if using
Fired Earth Stone Shield only*
If finishing with Fired Earth
Stone Finish, use Fired Earth
Super Floor; if sealing with MN
Stain Stop* use MN Easy Care*
For wet areas re-apply MN Stain Stop* when tiles appears porous; For dry
areas, re-apply Fired Earth Stone Finish when tiles appear dull. Wax paste
will be required for Pale Classic and chipped edge tile (use only in dry areas)
Natural Stone
(inc. Stone Mosaics)
MN Stain Stop to
retain natural
appearance* Stone Shield to
enhance natural
colours*
If sealing(dry areas only) with
Fired Earth Stone Shield, use Fired
Earth Stone Finish; if sealing with
MN Stain Stop no finish is required* If finishing with Fired Earth
Stone Finish, use Fired Earth
Super Floor; if sealing with MN
Stain Stop use MN Easy Care*
For MN Stain floors, it is advisable to re-apply the MN Stain Stop if
tiles become porous. For Fired Earth Stone Finish floors, reapply when
floor appears dull*
Roman Mosaics MN Stain Stop* Not required MN Easy Care*
It is advisable to reapply the MN Stain Stop*
if tiles becomes porous
Porcelain
Tiles do not require sealing; seal
grout joints with MN Stain Stop*
Not required MN Easy Care* Not required
Glass
Tiles do not require sealing; seal
grout joints with MN Stain Stop*
Not required MN Easy Care* Not required
Product Selector 2 - Sealing, Finishing and Maintenance Quick reference guide
23 22
* Read the instructions on the packaging of Adhesives, Grouts and Sealants very carefully.
Notes:
Use this table in conjunction with Fired Earth Installation guides.