Panasonic CSE9PKEW - Manual (Page 8)

Operation mode
AUTO : During operation mode selection the POWER indicator blinks.
Single
• Unit selects operation mode every 10 minutes according to setting temperature and room temperature.
Multi
• Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and room
temperature.
HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.
COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.
DRY : Unit operates at low fan speed to give a gentle cooling operation.
nanoe-G in-fi lter deactivation
Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may activate only once a day after
the unit turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. This
process only applicable when the unit is operated in COOL/DRY mode before turned off. Then, nanoe-G deactivates
viruses/bacteria on the fi lter for 2 hours with fan stopped and louver closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.
ECONAVI and AUTO COMFORT
ECONAVI
AUTO
COMFORT
or
Note
AIR SWING
When manual AIR SWING is selected,
the ECONAVI and AUTO COMFORT
operations will be cancelled.
The unit will start to initialise
(for approximately 1 minute) The human activity sensor
and the sunlight sensor will
start to detect.
Human activity sensor operation
Low activity Normal activity Human
Mode
Set
temperature
High activity Absent
ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.
Low activity Normal activity Human
Mode
Set
temperature
High activity Absent
Set
Fan Speed
AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human
ECONAVI and AUTO COMFORT take advantage of
the human nature that human being takes time to feel
the temperature rise during low activity level; the unit
adjusts temperature to maximise energy saving
without sacrificing the comfort.
comfortable consistently.
HEAT
COOL/DRY
HEAT
COOL/DRY
* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.
** During human absence, maximum fan speed for COOL/DRY mode is medium fan.
-2 °C -2 °C
+1 °C
+2 °C
-1 °C
Low activity Human Mode
Precise control of temperature during low activity to maximise energy saving.
Set
temperature
COOL/DRY
ECONAVI and AUTO COMFORT
+1 tap
”0HGLXP)DQ
+1 tap*
-2 °C
+0.3 °C
-2 °C
+2 °C
+1 °C
8
To learn more...
Single Single split system
Multi Multi split system