Akai MPC5000 - Manual (Page 23)

19
„ Pitchbend / Modwheel / Aftertouch
The Pitchbend Range, Modwheel Depth and Aftertouch amount can be
set in the PGM page. To access the PGM page, press [F3] (PGM) in
Program Mode.
Pitchbend
Pitchbend responds to MIDI Pitchbend, and can be set to have a range
of 0-12 semitones
Modwheel>LFO
The Modwheel controls the LFO Depth, and can be set from 0-100%
effect.
Aftertouch>Filter
Aftertouch can be set to control filter cutoff, and can be set from 0-100% effect.
Improvements to Sample Programs
The following section details improvements to Sample Programs, most often used for Drums, Loops and Slices.
„ Per-Sample Panning
Samples slots can be individually panned. To adjust the panning of a
sample, do the following:
01. Select the sample slot you wish to pan.
02. Press the [WINDOW] button.
The PLAY MODE window will be displayed. Each sample slot is
represented by the corresponding number.
03. Adjust the 'Pan' Field to change the stereo position of the sample
within the selected sample slot.
„ Multi Pad Edit
The MPC5000 now has the ability to edit multiple pads at the same
time, setting all pads to the same setting. When Multi Pad Edit is
active, any change made to a pad will be made to all pads. To activate
Multi Pad Edit, do the following:
01. In PROGRAM Mode, Select the 'Pad Number' field as indicated on
the right.
02. Scroll with the [DATA] wheel to the left, or press the [-] button.
The 'Pad Number' field will change to 'MULTI' as indicated on the Right.