Panasonic CU2E15PBE - Manual (Page 6)

FAN SPEED
MANUAL
AUTO
QUIET
MODE
POWERFUL
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1 2 3
CHECK CLOCK RESET
OFF
TIMER
ON
TIMER
FAN
SPEED AUTO
HEAT
COOL
DRY
AIR SWING TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1 2 3
CHECK
Remote control
display
Press to restore the
remote control to
default setting.
Press and hold for
approximately 10
seconds to show
12-hour (am/pm) or 24-
hour time indication.
6
How to use
Auto OFF/ON button
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
Use when remote control is a malfunction occurs.
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release
to use in normal COOL mode.
4. Repeat step 3. Press and hold the button until you hear 3 beeps, then release
to use in forced HEAT mode.
• Press the button again to turn off.
Control Panel
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
OPE N CLOSE
CL OSE OPEN
POW ER TIM ER AIR SWING OFF/O N
MODE
To select operation mode
AUTO - For your convenience
• During operation mode selection the POWER
indicator blinks.
• Unit selects operation mode every 3 hours
according to setting temperature, outdoor
temperature and room temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up. The POWER
indicator blinks during this operation.
COOL - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
POWERFUL
POWERFUL
To reach temperature quickly
• Press the button again or
turn OFF the unit to stop this
operation.
QUIET
QUIET
To enjoy quiet operation
• This operation reduces airfl ow
noise.
Can be activated in all modes and can be
cancelled by pressing the respective button again.
Remote control
receiver