Panasonic DVDLS83 - Manual (Page 6)

6
RQT
9
097
Playback Playing discs
≥ To change the language on the display ➜ 13, Menu Language
≥ To play audio ([MP3]), picture ([JPEG]) or video ([MPEG4] [DivX]) on
DVD-RAM with recorded titles ( [DVD-VR]), select “Play as Data Disc”
( ➜ 12, Other Menu).
≥ While stopped, the unit automatically turns off once about 15 minutes
(about 5 minutes when using the battery pack) have elapsed.
≥ Total title number may not be displayed properly on iR/iRW.
≥ If you are experiencing problems, refer to troubleshooting guide
( ➜ 18).
Note
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [
∫ –OFF] when you finish to preserve the unit’s motor.
Main unit operations
Remote control operations
[DVD-LS86]
Open the lid.
Insert a disc and close the lid.
≥ Load double-sided discs so the label for the side you
want to play is facing up.
≥ DVD-RAM: Remove discs from their cartridges
before use.
≥ Some discs start to play automatically when the unit
is on.
Press and hold.
The unit turns on and play begins.
≥ When “AUX” or “iPod” (
[DVD-LS86] ) is displayed,
press [AV SELECT] to select “DISC”.
( ➜ 16, Watching video from other equipment, Enjoying
with iPod)
Adjust the volume.
When using headphones, turn down the volume before
connection.
AV SELECT
Headphone terminals [ Ë]
‡ 3.5 mm stereo mini jack
OPEN
Click
into
place
ON
VOL
Turn unit
on/play
When the unit is off:
Press and hold and the power
comes on and play begins.
When the unit is on:
Press and play begins.
Pause
Press [ 1 ON] to restart play.
Stop
The position is memorized when
“Press PLAY to resume play”
appears on the screen.
≥ Press [1 ON] to resume.
(Resume play)
Opening the disc lid or pressing
[
∫ –OFF] while “Press PLAY to
resume play” is displayed on the
screen cancels the memorized
position.
Turn unit off
Press and hold until “OFF” is
displayed.
Skip
Press [ :, 9].
[DVD-VR] Can also skip to the
markers.
Search
Press and hold [ :, 9] (up to
5 steps).
Press [
1 ON] to return to normal
play.
Slow play
[DVD-VR] [DVD-V] [VCD]
Press and hold [
:, 9] (up to
5 steps) while paused.
Press [
1 ON] to return to normal
play.
[VCD] [
9] only
Top menu [DVD-V]
Playing
programs [DVD-VR] ( ➜ 8)
Playback
Menu [WMA] [MP3] [JPEG] [MPEG4] [DivX]
(
➜ 8)
Menu [DVD-V]
Playing
playlists [DVD-VR] ( ➜ 8)
Navigation
Menu [WMA] [MP3] [JPEG] [MPEG4] [DivX]
(
➜ 8)
Return
Returns to the previous screen.
[VCD] (with playback control)
Returns to the menu.
ON
OFF
TOP MENU
MENU
RETURN
Menu
operation Press [ 3 4 2 1] to select an item
and press [ENTER] to confirm.
Number
Select
[VCD] (with playback control)
1 While the disc menu is
displayed,
press [DISPLAY] to display
On-Screen Menus.
2 Press [ 3 4] to select “Number
Select”.
3 Press [ 1] then [3 4] to enter
number.
≥Press and hold [3 4] to alter
faster.
4 Press [ENTER].
Frame-by-
frame
[DVD-VR] [DVD-V] [VCD]
While paused, press [
2 1].
[VCD] [ 1] only
Group skip
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Press [
3 4].
≥ Does not work while paused.
Turn unit
on/off
≥ You cannot turn on the unit
with the remote control if the
unit is powered by the
battery pack.
Play
Press and play begins.
Stop
Press and play stops.
≥ Press [1] (PLAY) to resume.
To cancel the memorized
position
➜ left, Resume play
Skip
Press [ :, 9].
[DVD-VR] Can also skip to the
markers.
Search
Press [ 6, 5] (up to 5 steps).
Press [ 1] (PLAY) to return to
normal play.
Slow play
[DVD-VR] [DVD-V] [VCD]
Press [
6, 5] (up to 5 steps)
while paused.
Press [
1] (PLAY) to return to
normal play.
[VCD] [
5] only
Enter
number
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12:
[
S10] ➜ [1] ➜ [2]
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
e.g. To select 123:
[1]
➜ [2] ➜ [3] ➜ [ENTER]
ENTER
PLAY
STOP
2 2
5
8
1
4
7
3
6 = 10 10
9 0
>
6
RQT9097-D_eng.fm 6 ページ ２００７年１２月１３日 木曜日 午後７時２８分