Arcam DV27 - Manual (Page 18)

18
Technical specifi cations
General
Power Requirements 115V or 230V AC, set by voltage selector switch on rear panel
Power consumption <30W
Dimensions 430mm x 90mm x 280mm
Weight net: 6.2kg
packed: 7.8kg
Video outputs
Composite video 1 x gold plated phono:
1V pk-pk into 75
Ω
S-Video 1 x 4-pin mini-DIN:
Y 1V pk-pk in 75 Ω , C 0.3V pk-pk into 75 Ω
Component video 3 gold plated phono sockets:
Y 1V pk-pk into 75 Ω ; Pb 0.7V pk-pk into 75 Ω ; Pr 0.7V pk-pk into 75 Ω .
SCART socket with RGB video All 0.7V into 75 Ω , composite video 1V into 75 Ω , and stereo audio.
Auto switching of TV with aspect ratio control
Progressive scan video Pure Progressive ™ motion adaptive 4-field processing by Silicon Image Corporation
3 gold plated phono sockets:
525P component video. Y 1V pk-pk into 75
Ω
; Pb 0.7V pk-pk into 75
Ω
; Pr 0.7V pk-pk into 75
Ω
Audio outputs
Analogue audio outputs Two pairs of stereo outputs on gold plated phono sockets
Output level 2.2V rms at 0dB signal
Frequency response 20Hz to 20kHz (+0.1db, –0.5dB)
THD+N <0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N 105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958) PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
Accessories supplied
CR-314 remote control
2 x AAA batteries
Mains lead
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
NOTE: All specification values are typical unless otherwise stated.