Alpine CDA-9807 - Manual (Page 11)

9
-EN
Displaying the Title/Text
It is possible to display the CD/Station title if the title has
been previously inputted. For details, see “Titling Disc/
Stations” (page 10). Text information, such as the disc
name and the track name, will be displayed if playing a
CD text compatible disc. It is also possible to display the
folder name, the file name, and the tag, etc. while playing
MP3/WMA files.
1
Press the DISP/TITLE button.
The mode will change every time the button is
pressed.
About “Title” and “Text”
Title:
With this device, it is possible to input the CD/
Station name (refer to page 10). This inputted name
is referred to as a “title.”
You cannot input or display titles on MP3/WMA
discs.
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as “text.”
Radio mode:
CD mode: (Text is displayed for the CDA-9805 model
when a compatible changer with CD text is connected.)
↓
FREQUENCY DISPLAY
↓
CLOCK DISPLAY
↓
TITLE DISPLAY ∗2
↓
ELAPSED TIME DISPLAY
↓
CLOCK DISPLAY
↓
TEXT DISPLAY (DISC NAME) ∗1
↓
TEXT DISPLAY (TRACK NAME) ∗1
↓
TITLE DISPLAY ∗2
MP3/WMA mode: (MP3 files can be played back with
the CDA-9805 model if an MP3 compatible changer is
connected.)
∗1
Displayed during playback of a disc with CD Text.
“ NO TEXT” will be displayed when the CD contains
no Text data.
Text cannot be displayed for the CDA-9805 model.
∗2
If the title was not previously input, “NO TITLE” is
displayed.
∗3
The recording sampling rate and bit rate of the
MP3/WMA file are displayed.
∗4
If an MP3/WMA file contains ID3 tag/WMA tag
information, all the ID3 tag/WMA tag information is
displayed.(e.g., track name, artist name, and album
name). All other tag data is ignored.
“NO DATA” will be displayed if an MP3/WMA file
contains no ID3 tag/WMA tag information.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (refer to page 11) is set to “SCR
MANU”, press and hold the DISP/TITLE button for at
least 3 seconds to scroll the Text information only once (TEXT
DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY
or TAG DISPLAY mode).
• "NO SUPRT" is displayed when the desired text information
cannot be displayed on this unit.
↓
FILE/ELAPSED TIME DISPLAY
↓
FOLDER NO./FILE NO. DISPLAY
↓
CLOCK DISPLAY
↓
FOLDER NAME DISPLAY
↓
FILE NAME DISPLAY
↓
TRACK NAME DISPLAY
↓
ARTIST NAME DISPLAY
↓
ALBUM NAME DISPLAY
↓
FRAME DISPLAY ∗3
∗4
ID3 tag/
WMA tag