Parts names and handling instructions, Safety precautions, Important information – Panasonic NTDP1 User Manual
Page 6: Caution, Pay attention to the appliance when it is in use, Otherwise it may cause smoke or fire.), Do not drop the appliance to avoid damaging it, Or insertion slots
10
11
English
Parts Names and Handling Instructions
Size of bread
8~13 cm
8~12 cm
Thickness:
1~2 cm
Insert the bread with the longer side facing down.
•
If the bread is too large, thick, thin or bread with uneven surfaces, it may get
•
jammed or caught inside of the toaster.
If the bread is too small, it may get caught inside of the toaster or pop it up.
•
If bread gets jammed, unplug the toaster, let it cool, and carefully remove the
•
bread. Otherwise it will keep toasting. Don’t use anything sharp to remove the
bread, you’ll damage the heating elements.
Note
When using the toaster for the first time, there may be a small amount some smoke or smell. This will disappear
●
with usage.
The illustrations inside mainly show model NT-ZP1.
Please remove the protection seals from the appliance before use.
Safety Precautions
Please make sure to
follow these instructions.
CAUTION
Pay attention to the appliance when it is in use.
(It may cause fire.)
When leaving it, turn the power off.
●
Make sure the crumb tray is clean and set correctly
when using the appliance.
(It may cause fire or injury.)
Unplug and allow the appliance to cool down fully
before cleaning and storing away.
(It may cause burns.)
Do not move the appliance while it is hot.
●
Press down the toast lever only for toasting, never
block it.
(It may cause burns.)
Make sure to clean the appliance after every use.
(Otherwise It may cause smoke or fire.)
Important Information
Do not drop the appliance to avoid damaging it.
●
Do not turn on the appliance for purposes other than toasting or
●
warming up bread.
Do not turn on the appliance if the insertion slots are covered
●
with bread.
Do not toast anything other than breads, for example pastries.
●
This appliance is not intended to be operated by means of an
●
external timer or separate remote-control system.
Do not move the appliance by holding the levers, warming rack
●
or insertion slots.
Toast lever
Warming rack lever
Insertion slot
Crumb tray
Slide out to remove.
●
Mains lead
Warming rack
Browning level
indicator (For NT-ZP1)
Defrost indicator
(For NT-ZP1)
Reheat indicator
(For NT-ZP1)
Mains plug
* The shape of the mains
plug may be different
from illustration.
Cord storage
Store the mains lead
●
as illustrated. Do not
set the mains lead in
the opposite direction.
Before you store the
mains lead, clean the
toaster as crumbs
may spill out. (P.14)
Before using the toaster,
●
adjust the length of the mains
lead in these places.
NT-ZP1
NT-DP1
Browning control
button
Browning level
indicator
Defrost button
Reheat button
Stop button