Advantech Industrial Mini-ITX Motherboard with DDR2/Dual GbE/PCI AIMB-221 - Manual (Page 75)

65 AIMB-221 User Manual
Chapter 3
A
ward
BIOS
Setup
3.7.15 PowerOn by Alarm
The choices are "Enabled" and "Disabled". The fields that follow, indicate the date
and time that the alarm is set for, if enabled.
3.7.16 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or
Secondary IDE 0 (1) becomes active. The choices are "Enabled" and "Disabled".
3.7.17 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the FDD, interface,
COM port or LPT port is active. The choices are "Enabled" and "Disabled".
3.7.18 PCI PIRQ [A-D]#
When enabled, the system resumes from suspend mode if an interrupt occurs. The
choices are "Enabled" and "Disabled".
3.7.19 PWRON After PWR-Fail
Use this to set up the system after power failure. The "Off" setting keeps the system
powered off after power failure. The "On" setting boots up the system after failure.
3.8 PnP/PCI Configurations
Figure 3.9 PnP/PCI configurations screen
3.8.1 Reset Configuration Data
The default is Disabled. Select Enabled to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on card, and system configuration is in
such a state that the OS cannot boot.
3.8.2 Resources Controlled By
The commands here are "Auto(ESCD)" or "Manual". Choosing "Manual" requires you
to choose resources from the following sub-menu. "Auto(ESCD)" automatically con-
figures all of the boot and Plug and Play devices, but you must be using Windows 95
or above.