Panasonic ER2211 - Manual (Page 4)

4
English
Shaping your moustache
1. Remove the comb attachment.
2. Place the angled edge against the
skin and make the border of the
beard even.
Finishing the edges and Trimming the moustache
1. Slide the trimmer guide for Mini trimmer up
and turn on the trimmer.
2. Run the blade
lightly over the
surface to
smooth off a
beard surface.
Cutting of hair
Cut hair to the correct height by moving the trimmer back against
the flow of the hair.
Do not use the trimmer in an inverted position. This can cut hair
too deeply.
►
►
►
•
Using the trimmer Use
Trimming your beard and moustache
1. Apply a few drops of the oil to the blades.
(See page 6.)
2. Turn the dial to move the comb attachment
to the desired trimming length (between
1 mm and 20 mm).
Indicator
Trimming
length
Indicator
Trimming
length
1 1.0 mm 11 11.0 mm
2 2.0 mm • 12.5 mm
• 3.5 mm 14 14.0 mm
5 5.0 mm • 15.5 mm
• 6.5 mm 17 17.0 mm
8 8.0 mm • 18.5 mm
• 9.5 mm 20 20.0 mm
3. Slide the switch on the main body upwards to turn on
the trimmer.
4. Place the angled face of the comb
against the skin and cut the beard by
moving the trimmer in all directions to
obtain a uniform cut.
With curly facial hair, the comb attachment
may not cut all of the hair. In this case,
remove the comb attachment and use a
conventional comb to draw out the
remaining uncut hair. •
►