Battery installation/battery charging, Display language, Registering the handset to the base unit – Panasonic KXTGA661EXB User Manual

Page 5

Advertising
background image

5

Battery installation/Battery charging

(page 2: 2)

Important:
• Use the supplied rechargeable batteries. For replacement, we recommend

using the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.

• Wipe the battery ends (S, T) with a dry cloth.
• Avoid touching the battery ends (S, T) or the unit contacts.
• Confirm correct polarities (S, T).
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show

Please wait for 1 minute.

when the

handset is placed on the charger if it is not registered to the base unit.

• If the batteries are fully charged, but the operating time seems to be shorter,

clean the battery ends (

S

,

T

) and the charge contacts with a dry cloth and

charge again.

Display language

1

8

/1 (middle soft key) (11)

2

{

r}

: Select your desired language. s M s {ic}

Registering the handset to the base unit

Ensure that the handset is switched on. If it is not on, press and hold {ic} for
few seconds to turn the handset on.

1

Handset:
Lift the handset and press {ic}.

2

Base unit:
Proceed with the operation for your model.
N

KX-TG6611/KX-TG8051/KX-TG8611/KX-TG8621
Press and hold {x} for about 5 seconds. (No registration tone)

N

KX-TG6621/KX-TG6631/KX-TG8061
Press and hold {x} for about 5 seconds, until the registration tone sounds.

When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{

r}

: Select your desired language. s M s {ic}

TGA661EX(ex).book Page 5 Wednesday, April 13, 2011 4:16 PM

Advertising
This manual is related to the following products: