Panasonic ES2023 - Manual (Page 4)

7 6
After cleaning, put the pre-epilation
comb on the shaver head.
Replacing the outer foil of the
shaver head
(ES2027) (Fig. 6)
Never remove the outer foil for
other reason than to change it.
Removing the outer foil
While pushing the outer foil gently
with the fingers, use the fingernail
to release the plastic panel F
b on
the blade from the catches F a on
the inside of the frame.
Fitting the new outer foil
Holding the outer foil so that the
surface with the plastic panel F
b (i.e.
the surface that will contact the
inner blade) faces upward, insert
into the frame so that the catches
F
a on the frame fit into the holes on
the foil.
Caution
• As with all electrical appliances
epilator must be kept away from
water.
• Never leave children alone with
electrical appliances.
• Never pull the appliance at the
cable out of the socket.
• Never remove or insert the
adaptor into the socket with wet
hands.
• Do not use while bathing or being
in the shower.
• Do not wash with water.
• Always unplug this appliance from
the electrical outlet immediately
after use.
• Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by the manufac-
turer.
• Never drop or insert any object
into any opening.
• Keep the device away from
sources of flamability.
• Do not use this appliance with a
damaged or broken epilation/
shaver head.
• Always attach the power cord to
the appliance first, then to the
outlet. To disconnect, turn the
on/off switch to the “0 (off)”
position then remove the power
cord from the outlet.
• Use only the included power cord.
• Do not pull, twist, or severely bent
the power cord.
• Do not wrap the power cord tightly
around the appliance.
• A damaged or defective appliance
should be returned to the customer
service center or to an authorized
customer service agent.
Do not attempt to use a defective
appliance or repair the appliance
yourself. You will also loose in
such a case your warranty.
• We advise you to replace the
outer foil and the inner blade when
you notice a reduced shaving
performance.
Airborne Acoustical Noise:
65 (dB(A) re 1pW)
For underarms and bikini-line
It is helpful to use a shaver head 3
to 5 days before using the epilator.
Shaving
Before using make sure the blade
is not warped or damaged, as this
may cause injury.
Apply the shaver head so that the
whole of the blade is in close
contact with the skin.
Press gently and guide the appliance
slowly against hair growth. Applying
with too much force prevents hairs
from being guided to the blades so
that some areas may be left
unshaved.
Trimmer
It is helpful to use the trimmer only
when you want to cut the long hair.
When the trimmer is up, apply the
blade gently.
Shaving with pre-epilation comb
When the hair is long before
epilation, we recommend you to use
a shaver head with pre-epilation
comb.
Place the pre-epilation comb onto
the shaver head, and slide trimmer
up. When the pre-epilation comb is
in place, make sure the comb is in
close contact with the skin.
Further useful tips
• In the beginning, it is advisable to
epilate in the evening so that any
possible reddening can disappear
overnight. When you feel pain or
rash appears, cool the skin with
cold towel.
• Hair is easier to remove after
bathing or showering.
But your skin must be completely
dry!
• In order to prevent the risk of
ingrowing hairs, we recommend
the regular use of massage
sponges, e.g. after showering, or
exfoliation peelings.
Cleaning (Fig. 5)
Switch off and unplug the appliance
before cleaning.
Cleaning of the epilation head
Push the frame release buttons and
remove the frame.
Brush the epilation head.
While cleaning, you can turn the
epilation discs manually.
Be careful not to break the skin
protector when cleaning.
For disinfection of the epilation
discs please use only pure alcohol.
Attention! Wipe the main body only
with a damp cloth. The use of
alcohol etc. may cause discoloration
of deformation of the main body.
After cleaning, put the cap on the
epilation head.
Cleaning of the shaver head
(ES2027)
Push the frame release buttons and
remove the frame.
Remove the inner blade by lifting
straight up.
Clean with the brush.
Be careful not to apply too much
force to the outer foil.
ES2023_27EU_01 05.1.8 14:46 ページ 6