Panasonic WHUH12FE5 - Manual (Page 11)

11
English
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Indicates the next timer operation
programme
Day to be selected
Indicates the next timer
operation day
Programme number in a day
OFF Timer
ON Timer
Lights up if Timer operation is selected
1 Press to enter the timer setting mode.
2 Press or to select your desired day.
3 Press to confirm your selection.
4 “1” will be blinking, press to set
programme 1.
5 Press to select ON or OFF timer.
6 Press or to select your desired time.
You can set , , and the Water
Temperature Thermo Shift setting.
7 Press to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the is pressed, the setting at
that moment is confirmed and timer setup is ended.
To check current timer programme
1 Press to enter timer mode and press
to enter day setting.
2 Press or until your desired day is shown,
press to confirm your selection.
3 Press or to check the set programmes.
To modify current timer programme
or add new timer programme
1 Perform steps 1 to 7 of “Weekly timer
setting” to modify existing timer programme, or
add any timer programme.
To cancel current timer programme
1 Press to enter day.
2 Press or until your desired day is shown,
press to enter programme setting.
3 Press or until your desired day is shown.
Press to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press , then
press .
• To enable previous weekly timer setting, press ,
then press .
Dealer Operation/settings to be done only by the authorised dealer/specialist.
User Operation/settings to be done by the authorised dealer/specialist or user.
How to use