How to operate, Auto, heat, cool, dry, Select the desired operation – Panasonic CUE18DBE User Manual

Page 5: Button again to stop the operation

Advertising
background image

ENGLISH

5

CANCEL

/&&

4)-%2

/.

4)-%2

&!.

30%%$

!54/

(%!4

$29

#//,

/&&

MODE

TIMER

ON

1

2

3

OFF

CLOCK

RESET

SET

POWERFUL

FAN SPEED

AIR SWING

OFF/ON

QUIET

AUTO

MANUAL

CHECK

INVERTER

$29

(%!4

#//,

!54/

Operation Details

Auto, Heat, Cool, Dry

Troubleshooting

2

Select the

desired

operation.

3

Set the

temperature.

(16°C ~ 30°C)

Start the

operation.

1

HOW TO OPERATE

Powerful and Quiet operations can be activated in all

operation modes.

Press

OFF/ON

button again to stop the operation.

The room has a peculiar odour.

This may be a damp smell emitted by the wall, carpet, furniture or

clothing in the room.

Air conditioner does not cool or heat efficiently.

Ensure the temperature has been set correctly.

Ensure windows and doors have been closed properly.

Ensure filters are cleaned or replaced when necessary.

Ensure inlet and outlet vents of the units have not been obstructed.

To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.

Heat is obtain from outdoor air to warm up the room. Use an additional heater when the outdoor ambient temperature is low.

Hints

• Enables you to enjoy the cooling

effect at your preferred setting

temperature.

• The unit will automatically select

the operation mode according

to the setting, outdoor and room

temperature. During operation mode

selection, power indicator blinks.

For every 30 minutes, the operation

mode is reselected.

• Enables you to enjoy the warming

effect at your preferred setting

temperature.

• For cold air prevention, air might

not blow out immediately and power

indicator blinks when operation starts.

• Also operates in defrost mode

(maximum 12 minutes) where by the

power indicator blinks. The melted

frost is drained at outdoor unit and

indoor fan is stopped.

COOL - Cooling Operation

AUTO - Automatic Operation

HEAT - Heating Operation

• Enables you to set the desired

temperature at low fan speed which

provides you with dehumidifying

surroundings.

DRY - Soft Dry Operation

Advertising
This manual is related to the following products: