Panasonic ES2055 - Manual (Page 4)

4
English
Before use
Wet/foam epilation
Using
This epilation head is for legs/arms, so do not use it to your underarms
and bikini-line.
Trim your hair before epilating for the first time or if you have not epilated
for a long time. •
•
1. Wet your skin.
2. Remove the cap.
3. Wet the discs and place a small quantity of liquid body
soap on the discs.
4. Turn the switch on to the 1 or 2 position and then
epilate. (1=low speed epilation/2=high speed epilation)
Foam makes the epilator slide better, so you can move it fast. Always
wash the discs well after use to remove any residual soap.
Dry epilation
You can also epilate without wetting your skin or the discs.
Before use
For best epilation results
Using
90˚
Apply the epilator at a right angle to your skin
and press gently while moving it slowly
against the hair growth.
When using the appliance, pull your skin taut
where the area is prone to sagging (on the inside
of the knees and elbows).
Rub your skin to lift short hair.
Move the epilator with the side that has the foam keeper facing the front.
Do not remove the frame of the epilation head.
Do not use if your hair is longer than 5 mm.
Reddening might appear for your first use. Cool towel will help if you feel
pain or there is a rash.
We recommend regular use of massage sponges or exfoliation to prevent
ingrown hair.
•
•
•
•
•
•
•
•