Panasonic RFU700 - Manual (Page 3)

RQT8470
3
3
• Align the poles (+ and -) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to contact fl ame or water.
• If the unit is not going to be used for a long time or if the unit is to be powered exclusively by AC power, remove the
batteries and store them in a cool dark place.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can damage other items, cause damage to the unit, and may cause a fi re through short-circuiting
or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
Power sources
The unit can be powered with household AC power or dry cell batteries (not included).
Using a household AC outlet
Connect the AC power supply cord fi rmly to the unit and the outlet.
Using dry cell batteries (not included)
Unplug the power cord from the unit’s AC
IN socket.
1
• When the power cord is connected to the unit, the unit
cannot be powered by the dry cell batteries.
Remove the battery cover.
2
Insert six R14/LR14 batteries (not included)
in the numerical sequence.
3
Put the battery cover back in its original
position.
4
• Insert the batteries correctly with their “ ” and “ ”
poles aligned as displayed.
Removing the batteries
Push down on the “ ” side of battery 4 using
your fi nger, and remove batteries 3 and 4.
1
Put your fi nger into the cutout inside the
compartment, and remove batteries 6, 5, 1
and 2.
2
• The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
Do not use an AC power supply cord from any other type of equipment with this unit.
• If you are not going to use the unit for a prolonged time, it is recommended that you unplug the power cord from the AC
outlet. Power will still be consumed even when the unit’s power is not turned on. (Approx. 1.8 W)
Note
Insert the batteries in
numerical sequence
while pushing down on
their “ ” sides.
Bottom row at the back
Plug one end of the power cord (included)
into the unit’s AC IN socket.
1
Plug the other end into the household AC
outlet.
2
Household AC outlet
(AC 230 V, 50 Hz)
AC power supply cord
(included)
When the charge of the dry cell batteries is depleted, “LOW BATTERY” appears and “ ” fl ashes on the display panel.
Note
Dry cell battery
RF_U700_8470.indb 3 RF_U700_8470.indb 3 2005/10/25 17:22:13 2005/10/25 17:22:13