Panasonic EHHW51 - Manual (Page 8)


Heating the Iron Plate
1 1
Insert the plug into the power outlet.
2 2
Press and hold the OFF/ON Switch (D) for
approximately 1 second to turn on the styling
straightener.
The Illumination Lamp (B) glows.
Confirm that the LED Temperature Level Display (H) for
level 1 is blinking green.
Do not use the styling straightener if all the lamps are
blinking.
3 3
Set a temperature by using the Temperature
Level Adjustment Switches (C) according to
the characteristics and condition of your hair.
5
3
1
2
4
Indicator Temperature Wavy
Less
damaged
5 Approx.10 ˚C
 Approx.160 ˚C Your hair
type
Your hair
condition
 Approx.150 ˚C
 Approx.10 ˚C
1 Approx.10 ˚C Straight Damaged
For strong curls, raise the temperature setting. For
gentle curls, lower the temperature setting.
The temperature is raised using “+” and lowered using “-”.
Confirm that the LED Temperature Level Display (H)
have changed.
•
•
•
•
•
•
When the selected LED Temperature Level Display (H)
stops blinking (and glows), the styling straightener has
reached the selected temperature.
(Note that the time taken to reach operating
temperature may vary depending on the operating
environment.)
When you use the styling straightener for the first time,
be sure to set the temperature to level 1.
The temperature level 5 is high and may damage your
hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
After switching on, the styling straightener reaches
operating temperature (approximately 100 ˚C) after
about 1 minute.
Steam will be generated when you apply the
high-temperature Iron Plate (J) to wet hair. Be careful
not to burn yourself.
Avoid using flammable styling products, since they may
generate gases when heated.
Avoid accidentally touching the Temperature Level
Adjustment Switches (C) and changing the temperature
during use. •
•
•
•
•
•
•
EH-HW51_EU.indb 8 2011/03/28 10:38:45