Panasonic TYSP65PV600 - Manual (Page 4)

• After preparing the ends of the speaker cables
for the right and left speakers, connect them
as shown in the illustration.
• The red cable is for the (+) polarity and the
black cable is for the (-) polarity. Do not
connect the cables to the wrong polarities.
• If fixing the plasma television to the wall-
hanging bracket, first connect the speaker
cables to the plasma television.
6. Connect the speaker
cables.
Preparing the ends of the
speaker cables
Remove while
twisting
1. Press down on the lever.
2. Insert the cable.
3. Release the lever.
1. Push down the lever.
3. Return the lever to its
normal position.
2. Insert
the cable.
Installation
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where
they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your
products to your local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects
on human health and the environment which could otherwise arise from inappropriate waste handling. Please
contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
• To attach to each speaker, use the fixing
screws. To attach to the plasma TV, use the
bracket mounting screws.
5. Attach C brackets
Bracket mounting screws Fix screws
Mounting C bracket
Rear of speaker Rear of Plasma Television
Black
Red
Black
Red
1. Press down on the lever.
2. Insert the cable.
3. Release the lever.
4
English
TY_SP65PV600_784.indb 4 2006/06/12 14:55:38