Indoor unit – Panasonic CSRE24NKX User Manual

Page 6

Advertising
background image

6

CAUTION

Switch off the power supply and unplug before cleaning.

Do not touch the aluminium fi n, sharp parts may cause injury.

1

INDOOR UNIT

• Wipe the unit gently with a soft, dry cloth.

2

FRONT PANEL

Remove Front Panel

• Raise and pull to remove the front panel.

• Wash gently and dry.
Close Front Panel

2

1

1

1 Press down both ends of the front panel to close it.
2 Press at center of the front panel to close it securely.

(CS-RE18NKE, CS-RE24NKE, CS-RE18NKX,

CS-RE24NKX)

3

REMOTE CONTROL RECEIVER

4

ALUMINIUM FIN

5

HORIZONTAL AIRFLOW DIRECTION LOUVER

• Do not adjust by hand.

6

VERTICAL AIRFLOW DIRECTION LOUVER

• Do not adjust by hand.

7

AUTO OFF/ON BUTTON

• Use when remote control is misplaced or a malfunction

occurs.

Action

Mode

Press once.

Auto

Press and hold until 1 beep is heard,

then release.

Cooling

Press and hold until 1 beep is heard,

then release.

Press again until 2 beeps, then release.

Heating

Press the button to turn off.

8

ANTI-BACTERIAL FILTER

Anti-bacterial fi lter.

• Clean the fi lter whenever necessary.

• Wash/rinse the fi lter gently with water to avoid damage

to the fi lter.

• Dry the fi lter thoroughly under shade, away from fi re or

direct sunlight.

• Replace the fi lter every 10 years or replace any

damaged fi lter.

Part no.: CZ-SA22P

9

AIR FILTERS

• Air fi lter cleaning is required every two weeks.

• Wash/rinse the fi lters gently with water to avoid damage

to the fi lter surface.

• Dry the fi lters thoroughly under shade, away from fi re or

direct sunlight.

• Replace any damage fi lters.

POWER

TIMER

2

7

1

4

9

8

6

5

3

INDOOR UNIT

CLEANING INSTRUCTIONS

CLEANING INSTRUCTIONS

HINT

HINT

• Do not use benzene, thinner or scouring powder.

• Use only soap ( pH7) or neutral household detergent.

• Do not use water hotter than 40°C.

• To ensure optimal performance of the unit, cleaning

maintenance has to be carried out at regular intervals.

Dirty unit may cause malfunction and you may see error

code “H99”. Please consult authorized dealer.

Advertising
This manual is related to the following products: