Panasonic SHFX82E - Manual (Page 4)

4 VQT5J38
Pairing with the home
theatre unit
Refer also to the operating instructions for your
home theatre unit.
Using the remote control of the home theatre unit,
perform the following steps:
1
Turn on your home theatre unit.
≥ If the HOME menu is not displayed, press
[HOME].
2
Press [OK] to select “Setup”.
3
Select “Settings” to show the Setup menu.
4
Select “Sound” and press [OK].
5
Select “Speaker” and press [OK].
6
Select “Wireless System Pairing” and
press [OK].
Follow the on-screen instructions to pair the
wireless system and the home theatre unit.
≥ The wireless link indicator lights green
when the wireless system and the home
theatre unit are connected wirelessly.
≥ You can also perform this setup by selecting “Easy
Settings” in the Setup menu.
Troubleshooting guide
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult your
dealer for instructions.
The wireless link indicator does not light.
¾
Ensure the AC mains lead is connected
properly.
Pairing cannot be done.
¾
Disconnect and reconnect the AC mains lead
of the wireless system and the home theatre
unit, and do pairing again.
No sound from the surround speaker.
¾
Verify the surround sound setting on the
home theatre unit.
SH-FX82-VQT5J38_mst.book 4 ページ ２０１４年３月１１日 火曜日 午前１０時３０分