Panasonic TYFB10HMD - Manual (Page 7)

English
PC IN
SLOT1 SLOT2 SLOT3 SLOT3
HDMI
AV OUT
HDMI
AV OUT
1 3
2 4
19
18
7
Connection
Back view of the
Display
Applicable input signals
Video signal
Notes
• This terminal board has two pairs of inputs thus “-A” or “-B” is added at the end of each Input label to distinguish
between those inputs.
e.g.) INPUT1A, INPUT1B
• “-A” and “-B” will be displayed alternately when press the DIRECT INPUT button on the display’s remote control.
e.g.) INPUT1A → INPUT1B → INPUT1A - - - (When press the INPUT 1 button with installing the terminal board in Slot1)
• All inputs will be changed in rotation when press the INPUT button on the remote control. (However, the input
display time for this board's slot will be longer than that for the other slots.)
e.g.) INPUT1 → INPUT2A → INPUT2B → INPUT3 → PC → INPUT1 - - -
(When press the INPUT button with installing the terminal board in Slot 2)
• “-A” or “-B” will be added at the end of the selected label if Input label is chosen to be displayed.
e.g.) DVD2B (Label display of INPUT B when the terminal board is installed in Slot2 and DVD is chosen as a label.)
• Input A and B cannot be displayed together.
Signal format
fV
(Hz)
fH
(kHz)
Dot
clock
(MHz)
Number
of active
pixels
Total
number of
pixels
Number
of active
lines
Total
number of
lines
1 VGA60 59.94 31.47 25.18 640 800 480 525
2 525/60p 59.94 31.47 27.00 720 858 480 525
3 625/50p 50.00 31.25 27.00 720 864 576 625
4 750/60p 60.00 45.00 74.25 1280 1650 720 750
5 750/50p 50.00 37.50 74.25 1280 1980 720 750
6 1125/60i 60.00 33.75 74.25 1920 2200 1080 1125
7 1125/50i 50.00 28.13 74.25 1920 2640 1080 1125
8 1125/60p ※ 60.00 67.50 148.50 1920 2200 1080 1125
9 1125/50p ※ 50.00 56.26 148.50 1920 2640 1080 1125
10 1125/24p ※ 24.00 27.00 74.25 1920 2750 1080 1125
e.g.) DVD player (option) e.g.) DVD recorder (option)
[Pin assignments and signal names]
Pin No. Signal Pin No. Signal
ヂ T.M.D.S Data2+ ヌ T.M.D.S Clock Shield
ッ T.M.D.S Data2 Shield ネ T.M.D.S Clock-
ツ T.M.D.S Data2- ノ CEC
ヅ T.M.D.S Data1+
ハ
Reserved
(N.C.)
テ T.M.D.S Data1 Shield
デ T.M.D.S Data1- バ SCL
ト T.M.D.S Data0+ パ SDA
ド T.M.D.S Data0 Shield ヒ DDC/CEC Ground
ナ T.M.D.S Data0- ビ +5V Power
ニ T.M.D.S Clock+ ピ Hot Plug Detect
※ Applicable for PF10 series and
future models.
Audio signal
Linear PCM :
48/44.1/32 kHz
HDMI cable (option)
2 slots model Slot1, Slot2
3 slots model
Slot1, Slot2
(Slot3 is not compatible)
Slot Nos. of the display unit that are compatible
with terminal board attachments
TY-FB10HMD_820.indb 7 TY-FB10HMD_820.indb 7 2007/07/27 13:56:47 2007/07/27 13:56:47