Indoor unit – Panasonic CSE15LKE3 User Manual

Page 6

Advertising
background image

6

1

INDOOR UNIT

• Wipe the unit gently with a soft, dry cloth.

2

FRONT PANEL

Remove Front Panel

• Raise and pull to remove the front panel.

• Wash gently and dry.
Close Front Panel

• Press down both ends of the front panel to close it securely.

3

RECEIVER

4

ALUMINIUM FIN

5

ECO PATROL SENSOR

6

HORIZONTAL AIRFLOW DIRECTION LOUVER

• Manually adjustable.

7

VERTICAL AIRFLOW DIRECTION LOUVER

• Do not adjust by hand.

8

AUTO OFF/ON BUTTON

• Use when remote control is misplaced or malfunction.

Action

Mode

Press once.

Auto

Press and hold until 1 beep is heard,

then release.

Cooling

Press and hold until 1 beep is heard,

then release.

Press again until 2 beeps, then release.

Heating

Press the button to turn off.

9

e-ion CHARGING WIRE

10 e-ion FILTERS

• Clean the fi lters regularly.

• Wash/rinse the fi lters gently with water to avoid damage

to the fi lter surface.

• Dry the fi lters thoroughly under the shade, away from

fi re or direct sunlight.

• Replace any damage fi lter.

11 ACTIVE e-ion GENERATOR

Clean with dry cotton bud.

• Active e-ion generator cleaning is

recommended every 6 months.

CAUTION

Switch off the power supply before cleaning.

Do not touch the aluminium fi n, sharp parts may cause injury.

INDOOR UNIT

5

ECO PATROL SENSOR

• Do not hit or violently press the

sensor or poke it with a sharp

object. This can lead to damage

and malfunction.

• Do not place large objects near

the sensor and keep heating units

or humidifi ers of the sensor’s

detection area. This may lead to

sensor malfunction.

2

3

5

7

8

1

4

6

9

10

11

9 , 10 , 11

e-ion AIR PURIFYING

SYSTEM

• Do not touch during operation

WASHING INSTRUCTIONS

WASHING INSTRUCTIONS

HINT

HINT

• Do not use benzene, thinner or scouring powder.

• Use only soap ( pH7) or neutral household detergent.

• Do not use water hotter than 40°C.

• To ensure optimal performance of the unit, cleaning

maintenance have to be carried out at regular intervals.

Dirty unit may caused malfunction and you may retrieve

error code “H99”. Please consult authorized dealer.

Advertising
This manual is related to the following products: