Panasonic CURE15PKE3 - Manual (Page 8)

8
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40°C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
Wash gently and dry.
Remove the front panel
Raise
Pull out
1
2
Close it securely
Insert at
both sides
1
Press both ends of
the front panel
3
Close down 2
Air filters
Clean the filter regularly
• Wash/rinse the filters gently
with water to avoid damage to
the filter surface.
• Dry the filters thoroughly under shade, away
from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter Attach air filter
Insert into the unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling/
Heating operation. After 15minutes of operation,
it is normal to have the following temperature
difference between air inlet and air outlet vents:
Cooling: ≥ 8°C Heating: ≥ 14°C
For extended non-use
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Indoor unit
Aluminium fin Front panel
Air filters
01 F568946-en.indd 8 2012-11-9 9:42:12