Installation location, Electrical requirements – Panasonic U71PEY1E5 User Manual

Page 3

Advertising
background image

3

INSTALLATION LOCATION

• We recommend that this air conditioner be installed properly by qualified installation

technicians in accordance with the Installation Instructions provided with the unit.

• Before installation, check that the voltage of the electric supply in your home or office is the

same as the voltage shown on the nameplate.

ELECTRICAL REQUIREMENTS

1. All wiring must conform to the local electrical codes. Consult your dealer or a qualified

electrician for details.

2. Each unit must be properly grounded with a ground (or earth) wire or through the supply

wiring.

3. Wiring must be done by a qualified electrician.

Do not install this air conditioner where there are fumes or flammable gases, or in an
extremely humid space such as a greenhouse.

Do not install the air conditioner where excessively high heat-generating objects
are placed.

Avoid:

To protect the air conditioner from heavy corrosion, avoid installing the outdoor unit where
salty sea water can splash directly onto it or in sulphurous air near a spa.

To warm up the system, the power mains must be turned on
at least five (5) hours before operation. Leave the power
mains ON unless you will not be using this appliance for an
extended period.

Pull off the power plug from a receptacle, or switch off the breaker, or switch off the power
disconnecting mean to isolate the air conditioner from the main power supply when not in use
for a long time.

Power mains

ON

NOTE

01_85464609230020_EN.fm Page 3 Thursday, December 27, 2012 4:22 PM

Advertising
This manual is related to the following products: