Avenview C-MDP-VGA - Manual (Page 4)

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview C-MDP-VGA The Mini DisplayPort to VGA adapter enable you to connect any VGA interface
embedded device (Monitor, Projector etc.) with a Mini DisplayPort interface (Desktop, Laptop) and no need to
purchase any DisplayPort embedded terminal device.
- Plug & Play
- No extra drivers required
- Output Connector: 15 pin D-Sub
- Compatible with DisplayPort ver 1.1
- DPCD Rev 1.1 & HDCP 1.3 compliance
- Supports up to 1920x1200 resolution
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- C-MDP-VGA x 1
- User’s Manual x 1
1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.