Panasonic KXTGA830EX - Manual (Page 5)

5
• When replacing the batteries:
- USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
- Do NOT use Alkaline/Manganese/Ni-Cd batteries.
- We recommend using the Panasonic rechargeable batteries noted in the base
unit’s operating instructions for replacement battery information.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “
Please Wait... ” when the handset is
placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( S , T ) and the charge contacts with a dry cloth and
charge again.
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1 Handset:
Lift the handset and press {ih}.
2 Base unit:
Proceed with the operation for your model.
N
KX-TG8301
Press and hold {x} for about 5 seconds. (No registration tone)
N KX-TG8321
Press and hold {x} for about 5 seconds, until the registration tone sounds.
• If all registered handsets start ringing, press the same button to stop.
Then repeat this step.
3 Handset:
Place the handset on the base unit.
• Continue the operation even when the handset display shows
“ Please Wait... ”.
4 With the handset still on the base unit, wait until a confirmation tone sounds
and w stops flashing.
Note:
• If an error tone sounds, or if w is still flashing, register the handset according
to the base unit’s operating instructions.
• The KX-TG8301 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8321.
TGA830EX(ex).book Page 5 Friday, March 14, 2008 6:01 PM