Panasonic NRB54X1 - Manual (Page 7)

7
English
Installation
Removing the doors
If the refrigerator will not pass through a doorway or entrance, its doors can be removed.
CAUTION
Before removing the doors, be absolutely sure to check that the power of the refrigerator has been
turned off.
When you want to remove the doors, please contact your dealer, an authorized service centre or
access to our Web site (http://panasonic.net).
Panasonic or its Authorized agent cannot be held responsible if you remove the doors by
yourself.
Dimensions (mm): W900 × D610 × H1845 (Without Door)
Removing the front grille
When the two doors are opened and the front grille is viewed from
above, two screws – one on the left and the other on the right – will
be seen.
Turn these screws counterclockwise, and remove them.
There is a connecting area slightly to the right of the centre of the
front grille on its bottom. Take hold of this area, and pull the grille
toward you to remove it.
Front grille
Connecting area
Disconnecting the water supply hoses
Remove the connecting ring (black) of the water supply connector,
pressing the coupler and pull the water supply hose free.
● There are two water supply hoses, one for the Ice dispenser and
one for the Water dispenser.
Disconnect both of them.
Connecting ring Water supply
connector
Coupler
Reconnecting the water supply hoses
First insert the connecting ring (black) into the water supply
connector, and then insert the water supply hose.
Insert the water supply hose into the water supply connector until
the printed line on the hose is no longer visible.
● Two water supply hoses connect the same colour.
Connecting ring Line