Basic composition kit, 1x1 single-display formation, 2x2 multiple-display formation – Panasonic TYCF55VW50 User Manual
Page 11: Single-display formation, 2×2 multiple-display formation, 1×1 single-display formation, English
1
ENGLISH
Basic Composition Kit
Item Description
Quantity
A
Top Frame / Bottom Frame
2
B
Right Frame / Left Frame
2
C
L-Corner
4
D
T-Joint
4
E
Screws
16
F
Setup Manual
1
NOTE: Use the supplied screws only. The screws other than
those supplied may cause damage to the display.
1×1
Single-display Formation
Item Description
Quantity
C
A
E
B
B
A
C
C
C
A
Top Frame / Bottom Frame
2
B
Right Frame / Left Frame
2
C
L-Corner
4
E
Screws
16
F
Setup Manual
1
1. Spread a protective sheet on a flat surface, such as a
desk, and place the display on it. Be careful to never rest
display on its edges, damage may occur from doing this.
2. Attach the Top and Bottom Frames
A
with supplied
screws
E
.
3. Attach the L-Corners
C
to both sides of Top Frame and
Bottom Frame.
4. Attach the Right and Left Frames
B
with supplied
screws.
NOTE: This 1×1 formation rquires one basic-composition kit.
Four T-Joints
D
will be left unused.
2×2 Multiple-display Formation
Item Description
Quantity
C
A
D
B
B
A
C
B
C
D
B
C
A
D
E
D
A
A
Top Frame / Bottom Frame
4
B
Right Frame / Left Frame
4
C
L-Corner
4
D
T-Joint
4
E
Screws
32
F
Setup Manual
1
1. Attach four Top and Bottom Frames
A
with supplied
screws
E
.
2. Attach four Right and Left Frames
B
with supplied
screws
E
.
3. Attach four T-Joints
D
for each frame.
4. Attach four L-Corners
C
to four edges.
NOTE: This 2×2 formation rquires two basic-composition kits.
Four L-Corners
C
and four T-Joints
D
will be left unused.