Removing and attaching shelves, Making ice cubes, User alert functions – Panasonic NRB29SW2 User Manual

Page 14

Advertising
background image

14

14

Open the freezer, pull out the upper drawer and take out the ice tray

on the ceiling. Fill water in the ice tray to the water level line and then

place back the ice tray.

When ice cubes are ready, pull out the upper drawer and take out the

ice tray. Slightly twist the ice tray by holding its two sides, the ice cubes

will drop from the ice tray. Then, put the ice tray back into its place.

Water level line

Removing and attaching shelves

Fridge

Glass shelves

Lift the inner side of the shelf slightly and pull it out.

When removing the glass shelves, before pulling them out, remove

the door and bottle shelves first if they are in the way.

When you remove the glass tray, open the door until it touches the

stopper.

Crispers

Pull the crispers towards you and pull it out.

Door shelves and bottle shelves

Lift it slightly and then remove it.

Chill compartment drawer

Pull out the drawer, hold the front part and lift it up diagonally, and

remove it.

Freezer

Pull the drawer towards you, lift the front

slightly, and pull it out.

Having removed the drawer, you can store

food in the empty compartment.

Making ice cubes

User alert functions become active in the following situations.

Situation

Details

Alarm

How to stop the alarm

Mode has ended.

• The set time has been reached in Drink

Cool Mode.

Beeps continuously

Press .

Door ajar.

• The fridge and/or freezer door has been

left ajar for more than 2 minutes.

Beeps every 5 seconds

Close the door(s).

User alert functions

Advertising
This manual is related to the following products: