Panasonic ESRT53 - Manual (Page 8)

8
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10‑20 seconds.
5. Remove the outer foil section [B].
5
6. Clean the shaver and the outer foil
section [B] with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section [B] and the
shaver completely.
9. Attach the outer foil section [B] to
the shaver.
Cleaning with the brush
Clean the system outer foil
[B2], the shaver body and the
trimmer [D:] using the long
brush.
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
• Do not move the short brush in
direction (B) as it will damage
the inner blades [C] and affect
their sharpness.
• Do not use the short brush to
clean the outer foils.
(A) (B)
Maintenance
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [D4] and lift the outer
foil section [B] upwards.
Attaching the outer foil section
Securely attach the outer foil section [B] to
the shaver until it clicks.
ES-RT53_33_EU.indb 8 2012/07/25 9:31:20