Auto Page RS-1000 - Manual (Page 8)

RS1000 OP 1/07 8
E- P1- 4. “DEMO MODE”: To display the units demo mode
Spin down the switch
to page 1.
Press button 4 to start
the Demo movie.
Demo movie playing.
Press any Button to exit.
E- P2- 1. “POWER SAVE” SETTING: Example set the “Power Save Enable”.
While in the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
Spin down the switch
to page 2.
Press button 1 and it will
display the previous
setting. Press button 1 to
change the setting. Press the button and
the setting is completed.
You can disable power
save mode in the same
manner.
E- P2- 2. “PARKING METER” SETTING: Parking timer: Example set the “Parking Meter 30 min..
Note: When the “parking meter” expires, press any button to stop the beeper.
Spin down the switch
to page 2.
Press button 2.
Press button 1 three
times to set the parking
timer to 30 minutes. This
will toggle between
10/20 and 30 minutes. Press the button to
start the parking meter
and the icon will
flash on the main page.
D- P2- 3. “LIGHTING FOR OLED” SETTINGS: Example: Set the ON time for the OLED display from
2
seconds to 3 seconds.
Spin down the switch
to page 2.
Press button 4 and it will
display the previous
setting.
Press button 2 to
change the setting. Press the button and
the setting is done.