Panasonic CZRD514C - Manual (Page 2)

2
OFF / ON
TEMP
TIMER/CLOCK
MODE
CHECK
RESET
OFF/ON
CANCEL CLOCK
SET
SELECT UP
DOWN
AC RC
MODE FAN SPEED
AIR
SWING
WIRED REMOTE CONTROL
Press the remote control’s button
1 TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2 TO SET TEMPERATURE
• Selection range: 16˚C ~ 30˚C.
3 TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode during startup according to
temperature setting and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4 TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5 TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• For Hide-Away models, AIR SWING buttons are not in
use. Airfl ow direction can not be adjusted.
6
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
7
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
8 Press to restore the remote control’s default setting.
9 Not used in normal operations.
10 Retrieve error code.
• During operation, the unit stops and both a and b is
OFF indicates abnormality occurs.
1. Ensure a is OFF, press
CHECK
for 5 seconds.
2. Press or . If error code and abnormality can be
identifi ed, a will be ON continuously, then write down
the error code.
3. Press
CHECK
for 5 seconds to quit checking.
4. Turn the unit off and reveal the error code to authorized
dealer.
Remote Control Display
a OPERATION LED
b OFF INDICATOR
c OPERATION MODE SELECTION INDICATOR
d TIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different programs can
be set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON” the unit.
OFF Timer. To automatically switch
“OFF” the unit.
Day to be selected
Indicates the selected day
Indicates the next timer
operation day
e FAN SPEED DISPLAY
f TEMPERATURE SETTING DISPLAY
g ERROR CODE DISPLAY
Remote Control Preparation
1. Press CLOCK
2. Press
UP
or
DOWN
to select current day.
3. Press
SET
to confi rm.
4. Repeat steps 2 and 3 to set the current time.
d
a
g
3
5
1
4
2
f
6 10 b c 7 9 8
e