Panasonic ESLV61 - Manual (Page 8)


Clean
Cleaning the shaver
We recommend that you clean your shaver with the sonic
vibration cleaning mode when the faucet symbol appears
on the LCD panel.
1. Disconnect the power cord from the
shaver.
. Apply some hand soap and some water
to the outer foil.
. Rotate the lock ring [D7] to unlock the
power switch [D8].
. Press the power switch [D8] for more
than  seconds to activate the sonic
vibration cleaning mode.
appears on the LCD panel.
After about 0 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power switch.
5. Remove the outer foil section [B] and
press the power switch [D8] for more
than  seconds to activate the sonic
vibration cleaning mode and clean it with
running water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section [B] and the
shaver completely.
. Attach the outer foil section [B] to the
shaver.
9. Lubricate the shaver.
•
•
4
5
7
Cleaning with the brush
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
Clean the system outer foil
[B2], the shaver body and the
trimmer [D9] using the long
brush.
Do not move the short brush in
direction (B) as it will damage
the inner blades and affect their
sharpness. •
(A) (B)
Do not use the short brush to clean the outer foils. •
ES-LV61_EU.indb 8 2011/02/16 14:49:36