Panasonic EHNA65 - Manual (Page 13)

13
English
Troubleshooting
Problem Possiblecause Action
It switches frequently to cold air
while using in “Hot” mode, or
sparks can be seen within the
body.
(These sparks are caused by the
thermostat switch, the protective
device, and this is not a
malfunction.)
Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.
Remove accumulated lint.
Do not block the air inlet.
The hot air is abnormally hot.
The power plug is abnormally hot.
The connection to the household outlet is loose. Use a household outlet that fits securely.
Sparks are generated inside the
nanoe™ outlet.
Abnormality caused by a dirty electrode
(needle portion). Perform maintenance of the nanoe™
outlet.
The nanoe™ outlet emits a noise
(crackling noise).
If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorised by
Panasonic for repair.