Advantech 204 - Manual (Page 2)

INTRAC 204 Antenna Control Unit
SOUTH AMERICA
BRAZIL
Tel: +55 11 3054 5701
Fax: +55 11 5041 4026
[email protected]
EUROPE
UNITED KINGDOM
Tel: +44 1480 357 600
Fax: +44 1480 357 601
[email protected]
RUSSIA & CIS
Tel: +7 495 967 1859
Fax: +7 495 967 30 24
[email protected]
NORTH AMERICA
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
[email protected]
CANADA
Tel: +1 514 420-0045
Fax: +1 514 420-0073
[email protected]
An ISO 9001 : 2008 Company
Ref.: PB-INTRAC204-004-11036
Specifications are subject to change without notice www.advantechwireless.com
SPECIFICATIONS
SPECIFICATIONS
Operational modes Standby Manual (Jog) Search Remote Control
Auto (INTRAC) Go To (Position Designate)
Tracking Accuracy Typically better than 0.1dB RMS signal degradation after tracking for 24 hours (with tracking signal), for orbit
inclinations up to 10°
Prediction Accuracy Typically better than 0.1dB RMS signal degradation over 72 hours (after loss of tracking signal), for orbit
inclinations up to 10°
Backup Model data is stored in EEPROM and the real time clock supported by battery backup against power failure
Configuration Memory Configuration data is stored in EEPROM
Tracking Signal May be derived from an external tracking receiver or optionally from the integral IBR-L beacon receiver
External Tracking Signal Voltage varying directly with received signal strength (in dB).
Sensitivity 0.1V / dB to 1.0V / dB
Offset + / - 10 volts max
Lost Lock input, contact closure when tracking signal is lost.
Display 2 line LCD display giving the areas of information:
Azimuth angle
Signal strength Elevation angle
Diagnostics Polarization angle
Mode of operation Operational menus
Drive Outputs 36VDC, up to 8A for direct drive of DC actuator motors
Limit Switches Limit switch inputs for elevation, azimuth and polarization. Contacts normally closed
Position Transducers Inputs for standard resolver position transducers
OPTIONS
Internal IBR-L Beacon Receiver
This option accepts an L-Band signal, with an input level of -80 to -45dBm.
The signal voltage and lock lost indicators are generated internally. The need for an external beacon
receiver is eliminated.
Remote Control Terminal IBM PC compatible software is available to provide a remote control terminal function. The terminal
monitors and controls the INTRAC via the standard serial remote control port and provides facilities for
managing and storing multiple orbit models. Alarm information is still available at the front panel.
Polarisation Option Option to accept a polarization position transducer and to drive a 36VDC polarization motor.
PHYSICAL
Temperature
Range
0 to 50 o C - Operating
-25 o C to 85 o C - Non Operating (storage)
Humidity 5% to 95% RH non condensing - Operating
0% to 99% RH non condensing - Non Operating (storage)
Altitude 10,000 feet max
Input Power 110 or 230V, single phase, 50/60Hz, 50W
Dimensions 483mm (W) x 133mm (H) x 443mm (D).
Mounting 19" rack mounting unit, 2U high.
Weight 8 kg
EN55022 and EN50082-1
USA FCC Part 15, Subpart B Class A