Panasonic RRXS410E - Manual (Page 13)

VQT3T14
13
13
ENGLISH
• Turn the power on. ( ➜ page 9)
• Press [g STOP/RETURN] to stop the unit.
1 Press [F2 (FOLDER)].
2 Press u, i
to select the
recording
destination folder
and press [q OK]
to enter.
For microphone recording, select a folder
among folders “A”, “B”, “C” and “D”. (The
factory setting is “A”)
When you select a folder except for “A”, “B”,
“C” or “D”, recording is automatically saved
in “A”.
* You can select preset recording settings registered in advance according to the recording target.
(
➜ page 18)
* Change the recording mode or microphone sensitivity as necessary. ( ➜ pages 20, 21)
* If the file size exceeds 2 GB during recording, the recording stops tentatively at the point when the
data reaches 2 GB. Then, the recording resumes with a new file. Recording is not available during
the interval (approx. 2 seconds) from when the recording stops to when the recording resumes.
* Note if your finger or an object touches this unit during recording, the noise will be recorded
through the microphone.
3 Press [* REC] (Recording starts).
STOP REC
RETURN
The recording indicator
lights on.
4 Press [g STOP/RETURN] to stop
recording.
To pause recording:
1
Press [* REC] during recording.
Recording indicator blinks.
2 Press [* REC] again to resume recording.
Recording
* REC
LIST
g STOP/RETURN
F1 F2
VQT3T14_RR-XS410_400-E_En.indd 13 VQT3T14_RR-XS410_400-E_En.indd 13 2011/06/22 15:00:26 2011/06/22 15:00:26