Panasonic EY7540 - Manual (Page 11)

- 11 -
Information on Disposal for
Users of Waste Electrical &
Electronic Equipment (Private
Households)
This symbol on the
products and/or accom-
panying documents
means that used elec-
trical and electronic
products should not
be mixed with general
household waste.
For proper treatment,
recovery and recycling, please take these
products to designated collection points,
where they will be accepted on a free
of charge basis. Alternatively, in some
countries you may be able to return your
products to your local retailer upon the pur-
chase of an equivalent new product.
Disposing of this product correctly will
help to save valuable resources and
prevent any potential negative effects on
human health and the environment which
could otherwise arise from inappropriate
waste handling. Please contact your local
authority for further details of your nearest
designated collection point.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
For Business Users in the Euro-
pean Union
If you wish to discard electrical and
electronic equipment, please contact your
dealer or supplier for further information.
Information on Disposal in Other
Countries Outside the European
Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
IV. MAINTENANCE
Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine,
or other volatile solvents for cleaning.
V. TIGHTENING
TORQUE
The power required for tightening a bolt will
vary, according to bolt material and size, as
well as the material being bolted. Choose
the length of tightening time accordingly.
Reference values are provided below.
(They may vary according to tightening conditions.)
Factors Affecting Tighten-
ing Torque
The tightening torque is affected by a wide
variety of factors including the followings.
After tightening, always check the torque
with a torque wrench.
1) Voltage
When the battery pack becomes near-
ly discharged, the voltage decreases and
the tightening torque drops.
Bolt Tightening Conditions
0.5 0.0 1.0 1.5 2.0 3.0 2.5
M10
M8
M12
N ⋅ m
(k gf-cm)
49.0
(500)
98.0
(1000)
147.0
(1500)
Tightening torque
Tightening time (Sec.)
M8, M10 x 35mm. M1 x 45mm
High tensile bolt
(Bolt size: Millimeters)
EY7540(EU).indb 11 2006/09/12 18:41:58