AVERATEC 6200 Series - Manual (Page 42)

2 - 15
If unfortunately you can not release the CD tray by pressing the Eject Button,
you can release it manually:
1. Confirm that the computer is turned off.
2. Insert a pointed object (e.g. a straightened clip) into the Emergency
Eject Hole (n), and the CD tray will slide out partially. Then, gently
pull the tray out until fully extended (o).
3. Remove the CD, and then push the tray back into the drive.
Releasing the CD Manually
1. Confirm that the computer is turned on.
2. Press the Eject Button on the drive’s panel, and the CD tray will
slide out partially. Then, gently pull the tray out until fully extended.
3. Hold the CD by its edge with your fingers, and then lift it up from the
tray.
4. Push the tray back into the drive.
Removing the CD