Panasonic ESLV65 - Manual (Page 15)

15 TR
R
O
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
►Notes
• If you press the power switch for more than 2 seconds, the
sonic vibration cleaning mode is activated. (See this page.)
You cannot shave in this mode.
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to switch the mode or turn
off. Place your fingers on the finger rest while using the shaver.
• We recommend using the shaver in an ambient temperature
range of 5 – 35 °C. If used outside this range, the appliance
may stop operating.
Reading lamps when using
During use After use
The used time and remaining
battery capacity are shown and
then turn off after 5 seconds.
• The shown time returns to
[0’00”] after 10 minutes.
The lamps will light up and
then turn off after 8 seconds.
When the battery capacity is low
“10%” appears and “ ” blinks.
• You can shave 1 to 2 times after “10%” appears. (This will
differ depending on usage.)
• A full charge will supply enough power for approx. 14 shaves
of 3 minutes each. (This will differ depending on usage.)
Cleaning the shaver
We recommend that you clean your shaver with the sonic
vibration cleaning mode when the faucet symbol appears
on the lamp display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring [A7] to unlock
the power switch [A6].
4. Press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section [A]
and press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode and clean it
with running water.
6. Wipe off any drops of water with a
dry cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
9. Lubricate the shaver.
4
5
7