Scarlett SC-216 - Manual (Page 3)

www.scarlett-europe.com SC-216 3
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Please read all instruction manuals before use and save it for future references.
· For home use only. Do not use for industrial or commercial purposes. Use the steam iron only for its intended
use.
· Oiling of inner mechanism is not needed.
· Do not shock the scale with sudden loading or striking.
· Do not overload the scale.
OPERATING INSTRUCTIONS
START TO USE
· Plug A 9V battery (not included) into the battery case on the bottom, respecting the polarity.
· Place the scale on a hard and flat surface instead of the soft carpets.
· In order to switch on the scale, touch the platform by your foot on its downright corner.
· Wait a few seconds until the display will show 0.0 .
· If you step on the scale before zero, the display will show Err . If this happens, step off the scale, let it switch off
and simply repeat step 3.
WEIGHING
· Put your feet evenly on the scale without leaning to all sides.
· The display will be locked when you stably stand on the scale.
AUTOMATIC SWITCHING OFF
· The scale will automatically switch off after approximately 6 seconds if no weighing is carried out while the zero
is being displayed.
OVERLOAD INDICATOR
· When the scale is overloaded, the display shows oL .
BATTERY REPLACING
· Replace the battery when the display shows Lo
MAINTENANCE AND CARE
· Wipe the scale with a soft cloth and cleaner, and then dry it.
· Do not use any organic solvents, aggressive chemicals and abrasives.
STORAGE
· Complete all requirements of chapter MAINTENANCE AND CARE.
· Do not put anything on bathroom scale when not in use.
· Keep the scale in a dry cool place.
RUS
·
. .
· .
.
· .
· .
· .
· , A 9V
).
· . .
· , .
· , «0.0».
· , «Err».
, .
· . , .
· , .
· ( 0.0) 6 .
· «oL».
· «Lo», .
· .
· , .