Panasonic MCCG695 - Manual (Page 20)

20
Mains lead
Plug
Dust indicator
Turn the power control to the highest setting and
lift the nozzle off the fl oor. If the dust indicator
turns red, the dust bag is full and requires
replacing the dust bag.
Hose
Floor nozzle
MC-CG695 •
Release button
Dust cover
Dust bag (in body)
ENGLISH Please read the safety instructions (P.3) before using this cleaner. This product complies with the directives
2006/95/EC and 2004/108/EC.
CAUTIONS
The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
●
DO NOT use hot air or hot surface to dry filters. Dry them at room temperature for approximately 24 hours.
●
IMPORTANT: Before re-installing the washable filters, make sure they are completely dry to avoid damaging
●
the appliance.
Alternative nozzles
Crevice nozzle:
For narrow gaps, etc.
Upholstery nozzle:
For cushions, covers,
etc.
Dusting brush
(MC-CG695 only)
Trouble Shooting
Please check the following first if you have any problems.
If your problem is still not solved, consult your local retailer.
‘It won’t switch on!’
Check that the plug is connected firmly and the socket outlet
is working normally.
(If a thermal cut-out device has activated, please wait approx.
60 minutes until it has reset)
If the product still does not work, please take it to an
authorized service centre for repair.
Variable power control
The dusting brush can be set
between the telescopic wand
and the floor nozzle if you want.
Remove the floor nozzle by
pressing the release pedal and
you can use the dusting brush
easily anytime.
(MC-CG695 only)
ON/OFF Switch
pedal
2
Adjust the nozzle
to suit the floor
Carpet
Parquet
flooring
MC-CG691 •
Carpet
Parquet
flooring
First, assemble the parts together.
(Hose, Telescopic wand, Floor nozzle)
MC-CG695 • MC-CG691 •
Align the raised
section with the
hole.
Parts are set surely so as not to come
off.
Cord rewind pedal
Press the mark,
not the edge of the
switch.
Telescopic wand
Length may be adjusted.
MC-CG695 • MC-CG691 •
1
Start operation
Press
Press the mark, not
the edge of the switch.
Adjust power
by turning