Panasonic NVGS60EP - Manual (Page 31)

Playback mode
31
LSQT1171
Frame-by-frame playback
≥Set to Tape Playback Mode.
1 During playback, move the joystick up to
select the [
1/;] icon to pause playback.
2 Push the [ sVOLUMEr] lever.
Towards [T]: normal direction
Towards [W]: reversed direction
≥If you keep pushing the lever, then the images
will continuously be played back frame by
frame.
≥The pause icon appears for an instant.
Continuous frame-by-frame playback will start
after the pause icon disappears.
ª To return to normal playback
Move the joystick up to select the [ 1/;] icon to
start playback.
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥Insert a recorded tape into this camera.
≥Be sure that the power of the unit is turned off
before connecting it to a TV.
1 Connect the movie camera and a TV.
≥Connect the movie camera and a TV by using
the AV cable 1.
2 Turn on this camera and set the mode dial
to the Tape Playback Mode.
3 Select the input channel on the TV.
4 Move the joystick up to select the [ 1/;]
icon to start playback.
≥The image and audio are output on the TV.
5 Move the joystick down to select the [ ∫]
icon to stop playback.
≥Use the AC adaptor to free you from worrying
about the battery running down.
ª If the image or audio from this camera
is not output on the TV
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
-37- )
≥Check the connected terminal.
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
VOLUME
W T
1
[VIDEO IN]
[AUDIO IN]
A/V
LSQT1171ENG.book 31 ページ ２００７年１月１０日 水曜日 午後１時７分