American Standard Moments Bath/Shower Fitting R126SS - Manual

B13
© 2008 AS America Inc.
MOMENTS
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
T506.602 Shown with R126SS
MODEL NUMBER:
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool “thumping”. Avoids failure
due to mineral deposits - ideal for use with hard water.
Built-in Diverter: Easy to use, integrated in valve body
and includes positive shut-off. Allows spout and
showerhead in any desired installation location.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
GENERAL DESCRIPTION:
C ast brass valve body. Washerless 47mm ceramic disc
valve cartridge with volume and temperature control. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. threaded 1/2" NPT
inlets/outlets with screwdriver stops.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless ceramic disc valve
cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American
R126SS Pressure Balance Rough Valve Body
With Built-in Diverter & Screw Driver Stops.
LESS Trim.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Shower
Spout
100 80 60 40 20
R126SS Pressure Balance Rough Valve Body w/Built-in Diverter & Screw Driver Stops. LESS Trim.
T506.602 Bath/Shower Trim Kit. LESS Valve.
T506.600 Valve only Trim Kit. LESS Valve.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
Product
Number
Description
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
PVD
Stainless
Steel
075
Finish Options
Polished
Chrome
002
T506.600 Valve Only Trim Kit
With Built-in Diverter
• Brass wall escutcheon
• LESS Valv e
T506.602 Bath/shower Trim Kit
With Built-in Diverter
• Brass wall escutcheon with built-in diverter
• Adjustable “3 function” Showerhead
• Brass tub spout
• LESS Valve
Showerhead has
2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable
brass wall escutcheon. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adapter. Brass tub spout.
Standard Model # R126SS with T506.___.___ trim kit.
THREADED INLETS (STOPS)
INLETS
1/2" NPT
5-5/8"
5-5/8"
1-3/4"
OUTLETS 1/2" NPT
N/A N/A
PRESSURE BALANCE BATH/SHOWER
5-5/8" REF.
1-5/8" TO 3-1/4"
BOTTOM OF
TUB
74" FOR
HEAD CLEARANCE
1/2" NPT
FINISHED WALL
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
80'' AND 86'
8-1/8" REF.
4"
6-1/2"
1/2" NPT
1-1/2" REF.
18"
OPTIONAL
"SEE
ILLUSTRATION"
TOP OF
TUB RIM
SHW
TUB
8-3/8"
2-3/8"