Panasonic ERGY30 - Manual (Page 7)

7
English
Lubrication
Apply the oil to the outer foil, the pop‑up trimmer, and the trimmer
for beards before and after each use.
Outer foil and pop‑up trimmer
1. Apply a drop of oil to the
outer foil.
. Raise the pop‑up trimmer
and apply a drop of oil.
3. Turn on the shaver, and
run it for a few seconds.
Trimmer for beards ER‑GY50
1. Remove the inner blade
and slide the pop‑up
trimmer switch upwards.
. Apply one or two drops of
oil to the points indicated
by arrows.


Replacing the outer foil and the inner blade
outer foil once every year
inner blade once every two years
Replacing the outer foil
Never remove the outer foil at any time other than when replacing
it.
1. Press the foil frame release buttons
to remove the foil frame.
. Squeeze the front and the back side
of the foil frame and lift up one of the
two knobs on the outer foil.
3. Slip the outer foil into the frame and
guide the plastic edges onto the
hooks in the foil frame until it clicks
into the shaver.
Replacing the inner blade
1. Press the foil frame release buttons to remove the foil frame.
. Remove the inner blade by grasping it firmly at both ends and
pulling straight away from the shaver.
3. To insert the new inner blade, hold the blade at both ends and
press downward until it snaps into the shaver.


ER-GY50 EU.indb 7 2010/01/15 19:19:53