Panasonic SCNE1EG - Manual (Page 5)

5
VQT4U48
ENGLISH
Connections
≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily
influenced by magnetism.
≥ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth ® device
(“PAIRING”) is displayed. (l 6)
∫ To select the sound input level of the external device
1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK].
2 Press [
3, 4] to select “NORMAL” or “HIGH”.
≥ The default setting is “NORMAL”.
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the instruction manual of the other equipment.
≥ The cables and the devices are not supplied.
Additional Connection
モヤチリワ
Connect the AC mains lead.
To household mains socket
This unit consumes a small amount of AC power (l 10) even when turned off.
≥ In the interest of power conservation, if you will not be using this unit for an extended period of time,
unplug it from the household mains socket.
AC mains lead (supplied)
モヤチリワ
Connect an external music device (for AUX mode).
1 Plug the audio cable (not supplied) into the AUX jack.
Plug type: ‰3.5 mm stereo
2 Press [ , AUX] to select “AUX” and start playback on the
connected device.
Audio cable (not supplied)
SC-NE1_EG~VQT4U48.book 5 ページ ２０１３年１月１５日 火曜日 午後１時４分