Panasonic SCPMX2 - Manual (Page 8)

RQTV0215
8
8
Note
• This unit can play MP3 fi les and CD-DA format audio CD-R/RW
that have been fi nalized.
• It may not be able to play some CD-R/RW depending on the
condition of the recording.
• Do not use irregularly shaped discs.
• Do not use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
CD
• This unit can access up to 99 tracks.
• Choose a CD with this mark:
Using DualDiscs
The “CD” sides of DualDiscs do not meet the CD-DA standard so it
may not be possible to play them on this unit.
MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
• To play in a certain order, prefi x the folder and fi le names with the
3-digit numbers in the order you want to play them.
Discs (continued)
Numeric
buttons
Advanced play Advanced play
Repeat play Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ ” is cleared.
Program play Program play
This function allows you to program up to 24 tracks.
CD
1 Press [CD 6] and then [ 7 ].
2 Press [PROGRAM].
3 Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
4 Press [CD 6] to start play.
MP3
1 Press [CD 6] and then [ 7 ].
2 Press [PROGRAM].
3 Press [ALBUM or ] to select your desired
album.
4 Press [ / ¡/¢] once and then the numeric
buttons to select your desired track.
5 Press [ENTER].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD 6] to start play.
For two-digit track, press [ h10] once, and then the two digits.
For three-digit track, press [ h10] twice, and then the three digits.
To Action
cancel program
mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD 6].
check program
contents Press [ / 4/1] or [ /¡/¢] when
“PGM” is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [ /
4/1] or [ /¡/¢].
add to the program CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all
programmed tracks Press [CLEAR] in the stop mode.
“CLR ALL” is displayed.
Note
• When you try to program more than 24 tracks “PGM FULL”
appears.
• The program memory is cleared when you open the disc tray.
CD
• During program play, you can search backward or forward only
within the current track.
PMX2_E_EN.indd 8 PMX2_E_EN.indd 8 3/7/07 2:56:17 PM 3/7/07 2:56:17 PM